Table of Contents
Advertisement
Features and Displays (Continued)
Displays
The displays illustrated throughout this document are for
illustration purposes only. The display content will vary,
depending on configuration settings, type of administration set
in use, hospital-defined data set uploaded using the
Guardrails
Suite MX, programmed drug calculation
®
parameters, and many other variables. Refer to specific drug
product labeling for information concerning appropriate
administration techniques and dosages.
Configurable Settings
Reference the PC Unit Section of this
for system
DFU
configurable settings.
If the configuration settings need to be changed from the
"Factory Default" settings, reference the applicable Technical
Service Manual or contact Cardinal Health Technical Support,
for technical, troubleshooting, and preventive maintenance
information.
With the Profiles feature enabled, the settings are configured
independently for each profile. A hospital-defined, best-
practice data set must be uploaded to enable the Profiles
feature. Date and Time is a system setting and is the same in
all profiles.
Alaris
System Directions for Use
3-49
General Information
®
Patient Controlled Analgesia Module Section
Advertisement
Chapters
Table of Contents
Troubleshooting
