Viewing Patient History - Cardinal Health Alaris 8000 Series Directions For Use Manual

Changing Programming Parameters During an Infusion
5. Select desired infusion mode.
6. Continue programming. Reference applicable procedure:
Setting Up PCA Dose Only
Setting Up Continuous Infusion Only
Setting Up PCA + Continuous Infusion
7. Verify or change program settings and press
soft key.
8. Close and lock door.
9. Verify programming parameters on summary screen are
correct and press
NOTE:
Previously programmed values are carried over to new
program.

Viewing Patient History

1. Press
CHANNEL SELECT
2. From Main Display, press
3. Press Patient History soft key.
Alaris System Directions for Use
®
Patient Controlled Analgesia Module Section
Infusion Modes (Continued)
(Continued)
soft key.
START
key.
key.
OPTIONS
CONFIRM
A
Channel Options
1 of 2
PCA Pause Limits
Infusion Modes
Patient History
Dose
Request Setup
History
Drug Event
>Select an Option or
EXIT
PAGE
EXIT
DOWN
Programming
3-23