Attaching Cable And Sensor - Cardinal Health Alaris 8000 Series Directions For Use Manual

1. Attach applicable patient cable to
secure connection and patient cable is not twisted, sliced
or frayed.
2. Attach applicable sensor to patient cable. Refer to
sensor's directions for use for detailed instructions.
3. Attach sensor to patient. Refer to sensor's directions for
use for detailed instructions.
Alaris System Directions for Use
®
SpO Modules Section
2

Attaching Cable and Sensor

p Module. Ensure
S O
2
WARNING
8210 Series:
Use only approved O
sensors, and
DOC–10
pulse oximetry cables.
8220 Series:
Use only approved Masimo
sensors and patient cables.
Use of sensors, transducers, cables
and accessories other than those
specified may cause improper
Module performance resulting in
inaccurate readings, increased
emission and/or decreased
immunity, and degraded
electromagnetic compatibility
performance of the
S
For a list of compatible sensors and
cables, reference the Sensor and
Cable Compatibility Card (provided
separately).
CHANNEL
SELECT
MONITOR
CHANNEL
OFF
Patient Cable
Attach patient
cable here.
Getting Started
M
®
XI AX
and
OC–3
®
p
S O
2
p Module.
O
2
Attach sensor
here.
4-3