Selecting New Patient And Profile Options - Cardinal Health Alaris 8000 Series Directions For Use Manual

Adjusting Display Contrast (Continued)
2. To adjust display for optimum viewing, use
Lighter/Darker soft keys.
3. To return to main screen, press

Selecting New Patient and Profile Options

The following procedures assume the Profiles feature is
enabled.
1. Select required
• To indicate programming is for a new patient and clear
all stored patient parameters from memory, press Yes
soft key.
OR
• To confirm programming is for same patient and retain
all stored patient parameters, press No soft key.
Last used profile displays.
♦
2. Accept or change current profile:
• To accept current profile, press Yes soft key.
Main screen appears.
♦
• To change profile, press No soft key and continue with
next step.
Profile selection screen appears.
♦
Alaris System Directions for Use
®
PC Unit Section
Start-Up (Continued)
CONFIRM
option.
NEW PATIENT?
soft key.
System Options
Display Contrast
Guardrails Suite MX (v8) ®
Lighter
Darker
©2001-2005 Cardinal Health, inc.
or one of its subsidiaries. All rights
reserved. Guardrails® is a registered
trademark of Cardinal Health, inc. or
one of its subsidiaries.
>Adjust Display to
Desired Contrast
CONFIRM
Midtown Hospital
NEW PATIENT ? Yes
"Yes" Clears Previous
No
Patient Data
>Select Yes or No
DISPLAY
CONTRST
Midtown Hospital
Adult ICU
Adult ICU ? Yes
"Yes" Confirms Same
No
Profile
>Select Yes or No
General Setup and Operation
1-7