Attaching and Detaching Dose Request Cord
The Dose Request Cord must be attached to the PCA Module
when delivering a
PCA
infusion.
To attach Dose Request Cord:
• Insert latching connector into Dose Request Cord
attachment. Red marking on latching connector should be
aligned with red marking on Dose Request Cord
attachment.
To detach Dose Request Cord:
• Hold body of latching connector and pull straight away,
without twisting or turning, from Dose Request Cord
attachment.
3-2
Getting Started
dose or
+ continuous dose
PCA
Red alignment marks
Latching Connector
Alaris
System Directions for Use
®
Patient Controlled Analgesia Module Section
Dose Request
Cord Attachment