Responding to Maintenance Reminder
If the Preventive Maintenance (
enabled and the PC Unit or an attached module is due for
preventive maintenance, a
message appears at power up.
1.
Remove and, if needed, replace module requiring
maintenance with a new module (reference "Attaching
and Detaching Modules").
2.
If "system" (PC Unit and attached modules) was powered
off to replace PC Unit, reinitiate start-up process.
OR
If an "attached module" (such as, an Alaris
Module) was powered off and removed,
display reflects removal of that module. To
REMINDER
continue start–up process, press
NOTES:
If necessary, the reminder can be temporarily bypassed by
pressing the
CONFIRM
Notify the appropriate facility personnel when a
MAINTENANCE REMINDER
Adjusting Display Contrast
1.
Press
DISPLAY CONTRST
1-6
General Setup and Operation
Start-Up (Continued)
) Reminder option is
PM
MAINTENANCE REMINDER
®
MAINTENANCE
CONFIRM
soft key.
occurs.
soft key.
Pump
soft key.
MAINTENANCE REMINDER
B
Module(s) due for routine
preventive maintenance:
Module A: YYYY-MM-DD
CONFIRM
MAINTENANCE REMINDER
B
Module(s) due for routine
preventive maintenance:
CONFIRM
Midtown Hospital
NEW PATIENT ?
Yes
"Yes" Clears Previous
No
Patient Data
>Select Yes or No
DISPLAY
CONTRST
Alaris
System Directions for Use
®
PC Unit Section