Inspection Requirements - Cardinal Health Alaris 8000 Series Directions For Use Manual

Messages (Continued)
8210 Series (Continued)
Message
Check Sensor - Motion
Interference
Check Sensor - Weak Pulse
Check Sensor - Weak Signal
8220 Series
Message
Check Sensor - Low Perfusion
Check Sensor - Low Signal I.Q.
To ensure the system remains in good operating condition,
both regular and preventive maintenance inspections are
required. Reference the Maintenance Software and Software
User Manual (v or later) for detailed instructions.
8.1
REGULAR INSPECTIONS
PROCEDURE
INSPECT FOR DAMAGE:
Case
IUI Connector
Keypad
CLEANING
START-UP
4-38
Troubleshooting and Maintenance
Alarms and Messages (Continued)
Patient's motion has inhibited
monitoring.
Patient's low perfusion has
inhibited monitoring.
Low quality of signal being
measured.
Patient's low perfusion has
inhibited monitoring.
Low signal quality being measured.

Inspection Requirements

FREQUENCY
Each usage
Each usage
Each usage
As required
Each usage
(8210)
Meaning
(8220)
Meaning
Failure to perform these
inspections may result in improper
instrument operation.
Regular and preventive
maintenance inspections should
only be performed by qualified
service personnel.
Response
Check sensor. Move sensor to a
site with less motion.
Check sensor. Move sensor to a
better perfused site.
Check sensor. Confirm correct
sensor placement. Move sensor to
a better perfused site.
Response
Check sensor. Move sensor to a
better perfused site.
Check sensor. Confirm correct
sensor placement. Move sensor to
a better perfused site.
WARNING
CAUTION
Alaris System Directions for Use
®
SpO Modules Section
2