Cardinal Health Alaris 8000 Series Directions For Use Manual page 100

Secondary Infusion
Stopping Secondary and Returning to Primary
1. Press
CHANNEL SELECT
2. Press soft key.
SETUP
3. Press
PRIMARY
4. Close clamp on secondary administration set.
OR
Disconnect secondary administration set from upper
injection port.
5. Press soft key.
START
6. To stop secondary infusion and begin infusing primary,
press Yes soft key.
• Secondary infusion stops and primary infusion begins.
• Main screen appears.
NOTES:
To view additional drugs, press a soft key next to a letter
group to navigate through alphabet, and/or
soft keys.
PAGE DOWN
The facility may choose to to prepopulate standard drug
concentrations, or leave an open entry (_ _ / _ _ mL) and
allow the clinician to enter the desired concentration.
Once a patient weight or
automatically entered for any subsequent weight-based
calculation.
At rates less than
places, and the
decimal places.
The to
SEC PRI
manually ended and returned to primary.
2-44
Programming
- With Guardrails
(
Pump Module
Infusion (Continued)
key.
soft key.
is entered, for any module, it is
BSA
mL/h, the rate is displayed to
10
can be entered and is displayed to
VTBI
alert does not sound when the infusion is
Suite MX Protection
®
) (Continued)
and
PAGE UP
decimal
2
2
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Alaris System Directions for Use
®
Pump and Syringe Modules Section