Cardinal Health Alaris 8000 Series Directions For Use Manual page 155

Syringe Module (Continued)
Infusion Pressure,
Maximum:
Without Pressure
Sensing Disc:
With Pressure
Sensing Disc:
KVO (Keep Vein Open) Rate:
KVO Selection Range:
Occlusion Alarm Thresholds:
Without Pressure
Sensing Disc:
With Pressure
Sensing Disc:
Operating Principle:
Rate Accuracy:
Shock Protection:
Alaris System Directions for Use
®
Pump and Syringe Modules Section
Specifications (Continued)
Approximately
mmHg
1060
Factory default setting is
rate is mL/h or below.
0.9
rate can be set in System Configuration,
KVO
increments.
Three settings: Low, Medium, High
User selected,
Positive displacement
of full scale plunger travel (not including syringe variation)
±2%
WARNING
Syringe size and running force, variations of back pressure, or any
combination of these may affect rate accuracy. Factors that can
influence back pressure are: Administration set configuration,
solution viscosity, and IV solution temperature. Back pressure may
also be affected by type of catheter. Reference "Trumpet and Start-
Up Curves" for data on how these factors influence rate accuracy.
Type , Defibrillator Proof
CF
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
mmHg
800
mL/h if set rate is
1
- mmHg in mmHg increments.
25 1000 1
mL/h or above; or set rate, if
1
- mL/h in
0.01 2.5 0.01
General Information
mL/h
IV
2-99