Programming An Infusion - Cardinal Health Alaris 8000 Series Directions For Use Manual

4. When priming is complete, release
5. To return to main screen, press
• Guardrails Drug Setup screen displays.
6. Select infusion mode
NOTE:
Fluid is delivered during priming only while the PRIME soft key
is pressed. Each press of the PRIME soft key delivers up to
mL of priming/fluid per continuous press. To deliver
2
additional amounts, press the PRIME soft key again.

Programming an Infusion

1. Perform steps in "Getting Started", "Preparing Syringe
and Administration Set".
2. Perform following steps (reference PC Unit Section of this
, "General Setup and Operation", "Startup"):
DFU
a. Power on system.
b. Choose Yes or No to New Patient?
c. Select profile, if required.
d. Enter patient identifier, if required.
3. Press
CHANNEL SELECT
4. Unlock security door or set key to
5. Confirm time of day or change time if necessary.
3-10
Programming
Preparing Infusion (Continued)
Priming (Continued)
PRIME
EXIT
.
key.
PROGRAM
soft key.
soft key.
position.
A
PCA
Time of Day
Current time:
08:00
>CONFIRM Time-of-Day
EXIT
Alaris System Directions for Use
®
Patient Controlled Analgesia Module Section
Change
Time
CONFIRM