Configuring Dose Request Cord - Cardinal Health Alaris 8000 Series Directions For Use Manual

Viewing Drug Event History (Continued)
4. To scroll through history, press
5. To return to Main Display, press
NOTE:
The Drug Event History stores approximately
events and is automatically cleared upon selection of New
Patient?, Yes during start-up or upon changing drug in Drug
Library.

Configuring Dose Request Cord

The Dose Request Cord can be configured to provide both
audio and visual prompts to the patient. Visual prompts are
provided through the
Cord. Default configuration for the Dose Request Cord is
established in the system configuration.
To change Dose Request Cord configuration:
1. Press
CHANNEL SELECT
2. From Main Display, press
3. Press Dose Request Setup soft key.
3-26
Programming
Infusion Modes (Continued)
PAGE DOWN
EXIT
indicator on the Dose Request
LED
key.
key.
OPTIONS
soft key.
soft key.
hours of
12
A
Drug Event History
2003-06-10
TIME
PCA Dose, 1 mg
09:01
Unmet demands - 500
08:38
Continuous, 2 mg/h
07:08
PCA + Cont infusion
07:08
New syringe
08:08
Bolus Dose stopped
06:10
Bolus Dose, 1mg
06:08
History cleared
06:00
>Press PAGE DOWN or
PAGE UP to View Events
A
Channel Options
PCA Pause Limits
Infusion
Modes
Patient History
Dose
Request Setup
Drug Event
>Select an Option or
EXIT
EXIT
Alaris ® System Directions for Use
Patient Controlled Analgesia Module Section
1
DRUG EVENT
Morphine
P AGE
EXIT
DOWN
1 of 2
History
PAGE
DOWN