Error
Channel Error
Syringe Calibration Required
Syringe Driver Head Error
Message
Bolus Complete
Infusion Complete
Load Complete
Max Limit Reached
3-60
Troubleshooting and Maintenance
Alarms, Errors, Messages (Continued)
Errors
Error detected. Operation stops on
affected module.
Error on infusing module indicating
calibration is required. Infusion
stops on affected module.
CALIBRATE
Display.
Noninfusing module, with plunger
grippers open, senses excessive
pressure being applied downward
on Drive Head.
in Message Display.
Messages
Current bolus dose completed.
Channel running in continuous
dose if programmed.
Current infusion completed.
Current loading dose completed.
Infusion mode menu available or
programmed infusion running.
Programmed maximum limit has
been reached over time period
specified. Infusion paused until
time limit has expired.
Meaning
scrolls in Message
scrolls
OCCLUSION
Meaning
Patient Controlled Analgesia Module Section
Response
To silence alarm and continue
operation of unaffected modules,
press
soft key. Replace
CONFIRM
module with an operational
instrument, as required. Service by
qualified personnel is required.
To silence alarm and continue
operation of unaffected modules,
press
soft key. Replace
CONFIRM
module with an operational
instrument, as required. Service by
qualified personnel is required.
To silence alarm and continue
normal operation, press
soft key.
Response
None
Set up a new infusion or press
key.
CHANNEL OFF
None
To silence alarm, press
key.
To change Max Limit, press
CHANNEL SELECT
soft key, and unlock door or enter
Authorization Code applicable for
current Security Access Level.
Alaris
System Directions for Use
®
CONFIRM
SILENCE
, press
SETUP