Programming; Primary Infusion - With Guardrails; Suite Mx Protection - Cardinal Health Alaris 8000 Series Directions For Use Manual

References throughout this procedure to specific drugs and
drug doses are for illustration purposes only. Refer to specific
drug product labeling for information concerning appropriate
administration techniques and dosages.
Reference "General Information", "Features and Displays" and
the PC Unit Section of this
following:
• Displays
• Operating Features, Controls, Indicators
The majority of user interface programming is identical for
both the Pump Module and Syringe Module. When referring
to both modules, the term "infusion modules" will be used.
Primary Infusion
The following procedures are to be used only when the drug
to be infused is listed in the Guardrails
access the Guardrails
practice data set must be transferred using Guardrails
Software and the Profiles feature must be enabled.
1. Perform following steps (reference PC Unit Section of this
, "General Setup and Operation", "Start-Up"):
DFU
a. Power on system.
b. Choose Yes or No to New Patient?
c. Confirm current profile or select a new profile.
d. Enter patient identifier, if required.
2. Prepare and load syringe/administration set (reference
"Getting Started").
3. Prime (reference "Getting Started").
Alaris System Directions for Use
®
Pump and Syringe Modules Section
for information on the
DFU
- With Guardrails
Drug Library. To
®
Drug Library, a hospital-defined best-
®

Suite MX Protection

®
WARNING
When the pressure sensing
disc is not being used and an
Editor
®
occlusion occurs, there is a risk
of infusing pressurized buildup
of infusates upon correction of the
occlusion. To avoid an inadvertent
bolus, relieve the pressure before
restarting the infusion.

Programming

FU
FU
RATE (mL/h)
CHANNEL SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF RESTART
RESTART
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
2-17
Programming