Cardinal Health Alaris 8000 Series Directions For Use Manual page 189

Programming an Infusion (Continued)
6. Perform following steps:
a. Load syringe and administration set (reference
"Getting Started", "Loading Syringe and Administration
Set").
b. Select and confirm syringe type and size (reference
"Selecting Syringe Type and Size").
7. Press soft key next to desired drug.
• Drug/Concentration screen appears.
8. Press soft key next to desired concentration.
• Drug/Concentration confirmation screen appears.
• To view additional drugs/concentrations, press
and
UP PAGE DOWN
• Facility may choose to prepopulate standard drug
concentrations, or leave an open entry (_ _ / _ _ mL)
and allow clinician to enter drug amount and diluent
volume.
9. Confirm drug and concentration selection and press Yes
soft key. To change selection, press No soft key.
• If Yes was selected and facility has defined a Clinical
Advisory for that drug, a message appears. To
continue programming, press
10. Verify parameters are correct and press
confirm.
11. Prime syringe using Prime feature, if desired.
Alaris System Directions for Use
®
Patient Controlled Analgesia Module Section
Preparing Infusion (Continued)
soft keys.
CONFIRM
PAGE
soft key.
soft key to
NEXT
A
Guardrails Drugs
Med Surg
Morphine
A-E
F-J
K-O
P-T
U-Z
>Select Drug
EXIT
Guardrails Drugs
A
Med Surg
Morphine
1 mg/mL
5 mg/mL
10 mg/mL
>Select Concentration
DRUG
EXIT
LIBRARY
Programming
3-11