Primary Infusion
Bolus Dose (Continued)
3.
An optional hospital-defined and editable starting value
for bolus dose and/or bolus rate duration may already be
entered.
OR
To enter bolus dose, use numeric data entry keys.
•
After a bolus dose and weight (if used) are entered,
bolus
and concentration [conc] alternate in Main
VTBI
Display.
• If no weight has previously been programmed in
system and bolus dose is weight-based, weight entry
is empty.
• If programmed continuous dose is weight-based,
programmed weight displays.
• If bolus dose is not weight-based, Not Used displays
in
PATIENT WEIGHT
4.
To enter or change patient weight (if used), use applicable
following procedure, depending on whether or not
continuous dose is weight-based.
• To enter a weight when continuous dose is not weight-
based:
a. Press
PATIENT WEIGHT
b. To enter patient weight, use numeric data entry
keys.
OR
• To change weight when continuous dose is weight-
based:
a. Press
SETUP
b. Press
PATIENT WEIGHT
c. To change patient weight, use numeric data entry
keys.
-- Continued on Next Page --
Alaris
System Directions for Use
®
Pump and Syringe Modules Section
- With Guardrails
®
field.
soft key.
soft key.
soft key.
Suite MX Protection (Continued)
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
Guardrails Drug Setup
A A A
Alteplase
BOLUS DOSE
_ _ _ _
unit/kg
DOSE
PATIENT
WEIGHT
DURATION
[Conc]: 1 mg/mL
>Enter Bolus Dose
CONT-
SETUP
INUOUS
Programming
2-27