Reference the PC Unit Section of this
configurable settings.
If the configuration settings need to be changed from the
"Factory Default" settings, reference the applicable Technical
Service Manual or contact Cardinal Health Technical Support,
for technical, troubleshooting, and preventive maintenance
information.
With the Profiles feature enabled, the settings are configured
independently for each profile. A hospital-defined, best-
practice data set must be uploaded to enable the Profiles
feature. Date and Time is a system setting and is the same in
all profiles.
8210 and 8220 Series
Feature
Limit Mode
Pulse Beep Volume
Pulse Rate Alarm Limit, High
Pulse Rate Alarm Limit, Low
p
Alarm Limit, High
S
O
2
p
Alarm Limit, Low
S
O
2
Feature
SatSeconds
Alaris
System Directions for Use
®
SpO
Modules Section
2
Configurable Settings
for system
DFU
Default Setting
Adult
1
Adult Mode:
Neonatal Mode:
Adult Mode:
Neonatal Mode:
Adult: Off
Neonatal:
Adult:
90%
Neonatal:
8210 Series
Default Setting
Off
Options
Adult, Neonatal
1
bpm
120
31
bpm
200
bpm
50
30
bpm
100
21
95%
20
80%
Options
,
10
seconds; Off
,
,
, Off
2
3
-
240
bpm
-
bpm
239
-
, Off
100%
-
99%
(8210)
,
,
25
50
100
General Information
4-25