Preparing Infusion; Selecting Syringe Type And Size - Cardinal Health Alaris 8000 Series Directions For Use Manual

References throughout this procedure to specific drugs and
drug doses are for illustration purposes only. Refer to specific
drug product labeling for information concerning appropriate
administration techniques and dosages.
Reference "General Information", "Features and Displays" and
the PC Unit Section of this
following:
• Displays
• Operating Features, Controls, Indicators

Selecting Syringe Type and Size

At the start of an infusion program, the system prompts user
to select and confirm the syringe type and size.
1. Press
CHANNEL SELECT
position.
Alaris System Directions for Use
®
Patient Controlled Analgesia Module Section
for information on the
DFU

Preparing Infusion

key. Key must be in
WARNING
Ensure the displayed syringe
manufacturer and size correctly
identifies the installed syringe.
Mismatches may cause an under-
infusion or over-infusion to the
patient that could result in serious
injury and/or death. For a list of
compatible syringes, reference
"General Information", "Compatible
Syringes". If the installed syringe is
displayed and selected, but is not
recognized, servicing is required
(reference "Service Information" in
"Appendix" Section of this
PROGRAM
Programming
DFU
RATE (mL/h)
CHANNEL
SELECT
Programming
).
3-7