Infusion - No Guardrails Suite Mx Protection - Cardinal Health Alaris 8000 Series Directions For Use Manual

Infusion - NO
Continuous Infusion - Drug Calculation (Continued)
5. To enter diluent volume, use numeric data entry keys.
6. Press
PATIENT WEIGHT
7. To indicate whether or not patient weight is to be used in
Drug Calculation, press either Yes or No soft key.
8. To enter patient weight (if required) in kilograms, use
numeric data entry keys.
9. Press
TIME UNITS
10. To select time base for drug calculation, press either Min,
Hour, or Day soft key.
11. Press soft key next to desired
12. Verify correct infusion parameters and press
key.
• Syringe module: If
displays.
13. To make a rate or dose entry, press applicable soft key,
or and use numeric data entry keys (other
RATE DOSE,
value is calculated and displayed).
14. To enter volume to be infused, press
use numeric data entry keys.
• soft key appears only if Bolus Dose is enabled
BOLUS
within selected profile and a
• Syringe Module: When
appears inactive when
active when a value is entered.
2-48
Programming
Guardrails Suite MX Protection (Continued)
®
soft key.
soft key.
DOSING UNITS
Mode is enabled,
ALL
VTBI
is entered.
VTBI
equals
VTBI ALL
soft key is pressed and
VTBI
.
soft
NEXT
VTBI ALL
soft key and
, soft key
ALL
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF RESTART
RESTART
Alaris System Directions for Use
®
Pump and Syringe Modules Section