Anesthesia Mode; Delay Options; Delaying Infusion - Cardinal Health Alaris 8000 Series Directions For Use Manual

Reference the PC Unit Section of this
Delay Options can be enabled at the time the Alaris
is configured for use. If Delay Options is enabled, a primary
infusion can be programmed to be delayed for a specified
period of time and a callback can be scheduled, as described
in the following procedures.
Since by definition, an infusion with Delay Options will not be
infusing for a programmed period of time, it is assumed that
another infusing line will keep the vein open until the
IV
delayed infusion begins. When a delay is programmed, the
infusion stops when complete and no
The delay period for an infusion can be programmed as a
specific number of minutes or a time of day, as described in
the following procedures. An infusion delay can be
programmed prior to or after an infusion is initiated.
Specifying by Minutes
The Delay for option is used to program an infusion delay for
a minimum of minute and up to
1
1. Press

DELAY OPTIONS

-- Continued on Next Page --
Alaris System Directions for Use
®
Pump and Syringe Modules Section

Anesthesia Mode

.
DFU
Delay Options
is delivered.
KVO

Delaying Infusion

minutes.
120
soft key.
System
®
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF RESTART
RESTART
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF RESTART
RESTART
A
Infusion Setup
40
RATE
mL/h
250
VTBI mL
>Press START
DELAY SECOND- START
OPTIONS
ARY
Programming
2-57