Operating Features, Controls, Indicators - Cardinal Health Alaris 8000 Series Directions For Use Manual

Operating Features, Controls, Indicators

Status Indicators
Alarm Infusing
( ) (
red green
IUI Connector, Left
Rate Display
Message Display
Channel (module) Identification
Channel (module) Select Key:
When pressed, selects corresponding
module for infusion parameter entry
and infusion setup.
Pause Key:
When pressed during an
infusion, temporarily stops infusion on
that module. After approximately
2 minutes, a visual and audio prompt
begins.
Channel (module) Off Key:
pressed and held until a beep is heard,
stops infusion on that module, deselects
that module, and if only that module had
been operating, system powers down.
Repeat for other operating modules to
power off each module.
3-48
General Information
Features and Displays (Continued)
Security Lock
Standby
) ( )
yellow
When
Dose Request Cord
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Dose Request Cord Attachment
Patient Controlled Analgesia Module Section
Gripper Control /
Drive Head Release
(shown in closed
position)
Plunger Grippers
(shown in closed
position)
Restart Key:
pressed, resumes
operation of a
previously paused or
alarmed infusion on
that module.
Module Release Latch:
allows module to be removed
Alaris System Directions for Use
®
Barrel Flange
Gripper
Syringe Barrel
Sensor
Syringe Barrel
Clamp / Sizer
Security Door
When
When pressed,