New Patient (Continued)
6.
To scan bar code on patient identification band, press
scan trigger on hand-held scanner.
• If scan is successful, an audible tone sounds and
patient
displays on Main Display.
ID
7.
To unlock panel, clinician's
NOTES:
Automatic display of Patient ID Entry screen should be
enabled in the System Configuration settings.
If the patient
ID
entered later.
Patient
may be entered manually using the PC Unit keypad
ID
(reference PC Unit Section of this
While Infusion is in Progress
To associate the PC Unit with a patient
screen is not shown:
1.
Attach hand-held scanner to connection port on Auto-ID
Module. Ensure secure circuit connection.
2.
Press
OPTIONS
• Systems Options menu appears.
6-4
Programming
Patient Identification (Continued)
must be scanned.
ID
is not entered at this time, it can still be
DFU
ID
key.
).
when patient
ID
CAUTIONS
•
CLASS 1 LED PRODUCT
stare into the beam or allow
beam to strike patient's face.
• Always verify that information
displayed on the PC Unit
matches scanned data.
SILENCE
OPTIONS
1
2
4
5
7
8
0
CLEAR
Alaris
System Directions for Use
®
Auto-ID Module Section
Scan Trigger
: Do not
SYSTEM
ON
3
6
9
ENTER
.
CANCEL