WARNINGS
• The Pump and Syringe Modules are designed to stop fluid
flow under alarm conditions. Periodic patient monitoring
must be performed to ensure the infusion is proceeding as
expected. It is a positive displacement delivery system,
capable of developing positive fluid pressures to overcome
widely varying resistances to flow encountered in practice,
including resistances to flow imposed by small gauge
catheters, filters and intra-arterial infusion. It is neither
designed nor intended to detect infiltrations and will not
alarm under infiltration conditions.
• The use of positive displacement infusion devices ported
together with gravity flow infusion systems into a
common
site may impede the flow of common "gravity
IV
only" systems, affecting their performance. Hospital/facility
personnel must ensure the performance of the common
site is satisfactory under these circumstances.
• To prevent a potential free-flow condition, ensure no
extraneous object (for example, bedding, tubing, glove)
is enclosed or caught in the Pump Module door.
• Each time the Alaris
and/or set the monitoring mode, resistance alert, and/or
pressure alarm limit. If the monitoring mode,
resistance alert, and/or pressure alarm limit are not
verified, the instrument may not operate within the
desired occlusion detection parameter(s).
Alaris
System Directions for Use
®
Pump and Syringe Modules Section
Warnings and Cautions
General
System is turned on, verify
®
General Information
IV
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
General Information
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF
RESTART
RESTART
2-73