Displays; Configurable Settings - Cardinal Health Alaris 8000 Series Directions For Use Manual

The displays illustrated throughout this document are for
illustration purposes only. The display content will vary,
depending on configuration settings, type of disposable in use,
hospital-defined data set uploaded using the Guardrails
Suite MX, programmed parameters, and many other variables.
Main Display
Reference the PC Unit Section of this
Reference the PC Unit Section of this

configurable settings.

If the configuration settings need to be changed from the
"Factory Default" settings, reference the applicable Technical
Service Manual or contact Cardinal Health Technical Support,
for technical, troubleshooting, and preventive maintenance
information.
With the Profiles feature enabled, the settings are configured
independently for each profile. A hospital-defined, best-practice
data set must be uploaded to enable the Profiles feature. Date
and Time is a system setting and is the same in all profiles.
Feature
t Alarm Limit, High
E CO
2
t Alarm Limit, Low
E CO
2
i Alarm Limit, High
F CO
2
Limit Mode
No Breath Alarm
Respiratory Rate Alarm Limit, High
Respiratory Rate Alarm Limit, Low
Alaris System Directions for Use
®
EtCO Module Section
2
Features and Displays (Continued)

Displays

DFU
Configurable Settings
DFU
Default Setting
Adult:
Neonatal:
Adult:
Neonatal:
Neonatal:
Neonatal:
Adult Mode:
Neonatal Mode:
Adult Mode:
Neonatal Mode:
®
.
for system
mmHg
60
mmHg
60
mmHg
10
mmHg
10
Adult: mmHg
8
mmHg
8
Adult
Adult: sec
30
sec
20
bpm
35
bpm
150
bpm
6
bpm
12
Options
- mmHg
5 99
- mmHg
0 98
- mmHg
2 99
Adult or Neonatal
- sec
10 60
- bpm
1 150
- bpm
0 149
General Information
5-19