Anesthesia Mode (Continued)
Disabling
The Anesthesia Mode can be disabled, and normal operation
resumed, using either of the following three methods:
• System Options menu.
• Disconnecting from
• Connecting to
AC
From System Options Menu
1.
Press
OPTIONS
2.
Press Anesthesia Mode soft key.
3.
Press Disable soft key.
4.
Press
CONFIRM
• Anesthesia Mode no longer appears on Main Display,
indicating it has been disabled.
Connecting To AC Power
1.
Connect system to
2.
To continue using Anesthesia Mode, press Yes soft key.
OR
To discontinue Anesthesia Mode, press No soft key.
Disconnecting from AC Power
1.
Disconnect system from
• Anesthesia Mode is automatically disabled.
• All currently running infusions continue.
• A prompt appears as an alert that Anesthesia Mode
has been discontinued.
1-18
General Setup and Operation
System Options (Continued)
power.
AC
power.
key.
soft key.
power.
AC
.
AC
Yes
AC power cord was
connected.
No
Continue
ANESTHESIA MODE
?
>Select Yes or No
Alaris
System Directions for Use
®
PC Unit Section