Configurable Settings; Shared Infusion - Cardinal Health Alaris 8000 Series Directions For Use Manual

Drug Calculation Definitions and Formulas (Continued)
• Total bolus dose:
Bolus dose not weight-based = bolus dose entered.
Bolus dose weight-based = bolus dose x patient weight.
• Total dose:
Drug amount.
Drug amount / patient body surface area (
Drug amount / patient weight.
Reference the PC Unit Section of this

configurable settings.

If the configuration settings need to be changed from the
"Factory Default" settings, reference the applicable Technical
Service Manual or contact Cardinal Health Technical Support,
for technical, troubleshooting, and preventive maintenance
information.
With the Profiles feature enabled, the settings are configured
independently for each profile. A hospital-defined, best-
practice data set must be uploaded to enable the Profiles
feature. Date and Time is a system setting and is the same in
all profiles.
Feature
Delay Options
• Callback
Drug Calculation
• Bolus Dose
Multidose
• Callback
Pressure Dynamic
(
Dynamic Pressure Display
Volume/Duration
2-92
General Information
Configurable Settings
for system
DFU

Shared Infusion

Default Setting
Disabled
None
Disabled
Disabled
Disabled
None
Disabled
)
Disabled
).
BSA
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
Options
Enabled - Disabled
None, Before, After,
Before and After
Enabled - Disabled
Enabled - Disabled
Enabled - Disabled
None, Before, After,
Before and After
Enabled - Disabled
Enabled - Disabled
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
FU
RATE (mL/h)
CHANNEL SELECT
PAUSE
CHANNEL OFF
RESTART
Alaris System Directions for Use
®
Pump and Syringe Modules Section
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART