Multidose Mode - Cardinal Health Alaris 8000 Series Directions For Use Manual

Pausing Infusion (Continued)
3. Press
CONFIRM
• scrolls in Message Display.
PAUSE
• appears on Main Display.
PAUSED
• Yellow Standby Status Indicator illuminates.
• After minutes:
2
and audio prompts begin, and yellow Standby Status
Indicator flashes.
4. To reinitiate infusion:
• Press
RESTART
OR
• Press
CHANNEL SELECT
NOTES:
Using the Pause function in the Delay Options screen is the
same as pressing the
The time displayed in the upper right corner of the screen is
the time of day in a
Since, by definition, a multidose infusion will not be infusing
for a programmed period of time, it is assumed that another
infusing line will keep the vein open until the beginning of
IV
the first dose and between subsequent doses. There is no
keep vein open (
KVO
programmed Delay until infusion.
Syringe Module:
ALL
Mode.
2-62
Programming
Delay Options (Continued)
soft key.
-
PAUSE RESTART CHANNEL
key.
key and then
key on the Syringe Module.
PAUSE
-hour clock format (military time).
24

Multidose Mode

) infusion at the completion of a
Mode is not supported in Multidose
visual
soft key.
START
WARNINGS
• The Multidose feature is to be
• Caution labels, which clearly
• Single dose piggybacking
FU
FU
RATE (mL/h)
CHANNEL
SELECT
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL
OFF
CHANNEL
OFF RESTART
RESTART
FU
FU
RATE (mL/h)
SELECT CHANNEL
CHANNEL
SELECT
PAUSE
PAUSE
CHANNEL OFF
CHANNEL
OFF
RESTART
RESTART
used only by personnel
properly trained in using
multidose infusions.
differentiate single dose and
multidose containers, must be
utilized.
systems employing check
valve sets are not designed
for use with multidose containers.
Alaris System Directions for Use
®
Pump and Syringe Modules Section
FU
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART