Preparing Syringe and Administration Set (
Loading (Continued)
2.
Raise drive head to its fully extended position.
a. Twist gripper control clockwise and hold in position.
b. While holding gripper control in open position, raise
drive head to full extension.
c. Gently release gripper control.
3.
Insert syringe (from front of instrument) by sliding flat
edge of syringe barrel flange between barrel flange
grippers.
4.
Lock syringe in place.
a. Pull syringe barrel clamp out and hold.
b. Rotate clamp to right (clockwise or counter clockwise)
until it lines up with syringe.
c. Gently release clamp against syringe.
2-8
Getting Started
)
Syringe Module
(Continued)
Drive Head Fully Extended
Gripper Control / Drive
Head Release in Open
Position
Plunger Grippers Open
Syringe Barrel Clamp Closed
Alaris
Pump and Syringe Modules Section
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
CHANNEL
OFF
RESTART
FU
RATE (mL/h)
CHANNEL
SELECT
PAUSE
System Directions for Use
®