Power Board - Parker AC890 Product Manual

The Keypad
1
Changing the Product Code (3-button reset)
On rare occasions it may be necessary to change the default settings by changing the Product Code. The
Product Code is detailed in Appendix E.
A special key combination is required to change the product code. This feature is only available at power-
up as a security measure.
The 3-button reset will take you to the POWER BOARD menu in the expanded SYSTEM menu
(highlighted in the diagrams below).
6901 Keypad Combination
IMPORTANT
We recommend the menus marked * above are only used by Parker or suitably qualified personnel.
Note The LANGUAGE menu currently contains selection for ENGLISH only.
890SD (Standalone) Drive: Frame G, H & J
MENU AT LEVEL 2

POWER BOARD

Hold down the keys opposite:
890PX
Power-up the drive, continue
to hold for at least 2 seconds
LANGUAGE
DEFAULT TO 60Hz
REFORMAT FLASH
*
RESET STO LOCK
RESTART
*
EXIT TO BOOT
*
LANGUAGE
-
POWER BOARD
7.5kW 400V
POWER BOARD
menu at level
Select from the
expanded SYSTEM menu
HOLD
E
PROG
for example
M
E
see
diagram
t
below
Page
7-24