890CD Common Bus Drive & 890SD Standalone Drive
PREF
73.04
Shows the drive output frequency in Hz.
78.21
The value of the direct input, after scaling and clamping.
78.16
Speed Control mode and Torque Control mode selection. Torque Control mode = TRUE.
83.05
The final actual positive torque limit as a percentage of rated motor torque.
83.06
The final actual negative torque limit as a percentage of rated motor torque.
78.07
The auxiliary motor torque as a percentage of rated motor torque as a percentage of rated motor torque.
890SD Standalone Drive - Frames G, H & J
DIAGNOSTIC MENU
6901 Display
DRIVE FREQUENCY
(Refer to the PATTERN GEN function block)
DIRECT INPUT
(Refer to the SPEED LOOP function block)
TORQ DMD ISOLATE
(Refer to the SPEED LOOP function block)
ACTUAL POS LIM
(Refer to the TORQUE LIMIT function block)
ACTUAL NEG LIM
(Refer to the TORQUE LIMIT function block)
AUX TORQUE DMD
(Refer to the SPEED LOOP function block)
Keypad Menus
Range: —.xx Hz
Range: —.xx %
Range: FALSE / TRUE
Range: —.xx %
Range: —.xx %
Range: —.xx %
8-10
Page