Restore Defaults - Parker AC890 Product Manual

The Keypad
DEFAULT TO 60HZ
1
The setting of this parameter selects the drive operating frequency. It affects those parameters whose values
are dependent upon the default base frequency of the drive. Settings will only be updated following a
"restore macro" operation.
The default is 50Hz (6511 keypad = 0 , 6901 keypad = FALSE).
Refer to Appendix D: "Programming" - Frequency Dependent Defaults.

RESTORE DEFAULTS

Refer to "Resetting to Factory Defaults (2-button reset)", page 7-23.
890SD (Standalone) Drive: Frame G, H & J
7-26
Page