The Keypad
1
Alert Message Displays
A message will be displayed on the Keypad when either:
• A requested operation is not allowed:
• The drive has tripped:
Most messages are displayed for only a short period, or for as long as an illegal operation is tried, however,
trip messages must be acknowledged by pressing the E key.
Experience will show how to avoid most messages. They are displayed in clear, concise language for easy
interpretation. Refer to Chapter 9: "Trips and Fault Finding" for trip messages and reasons.
890SD (Standalone) Drive: Frame G, H & J
The top line details the illegal operation, while the bottom line gives the reason
or cause. See example opposite.
The top line indicates a trip has occurred while the bottom line gives the reason
for the trip. See example opposite.
* KEY INACTIVE *
1
1
REMOTE SEQ
* * * TRIPPED * * *
1
1
HEATSINK TEMP
7-14
Page