ANALOG OUTPUT
SETUP::INPUTS & OUTPUTS::ANALOG OUTPUT
The analog output blocks converts the demand percentage into a form suitable for driving the analog output electronics of the
Drive.
Parameter Descriptions
VALUE
The demanded value to output.
TYPE
The output hardware Voltage type. An incorrect selection will force the VALUE to be set to zero.
Enumerated Value : Type
Functional Description
The Drive has two analog outputs. There is an ANALOG OUTPUT function block associated with each of these:
AOUT1 is associated with terminal X12/06
AOUT2 is associated with terminal X12/07
890SD Standalone Drive - Frames G, H & J
PREF: 6.01, 7.01,
PREF: 6.05, 7.05
0 : -10..+10 V
1 : 0..10 V
Default: —.xx %
Default:0..+10V
Range: -300.00 to 300.00 %
Range: See below
Page
D-11