Parker AC890 Product Manual page 173

POWER BOARD (6901 keypad)
Hold down the keys opposite:
Power-up the drive, continue
to hold for at least 2 seconds
Config mode is selected,
indicated by all LEDs flashing
POWER BOARD
POWER BOARD

POWER BOARD

WELCOME SCREEN
The diagram above shows a 3-button reset when there is no power data stored in the drive. If the drive has
power data stored, then the "Power Data Corrupt" and "Language Defaults Loaded" alert messages will not
be displayed, also the display will show the current power board selection, instead of "????kW ???V".
7-25
Page
HOLD
s
-
E
????kW
M
????kW
7.5kW 400V
E
E
E
PROG
POWER DATA
CORRUPT
You need to select 890PX if you have 890PX
power boards, otherwise it will not show the
correct power ratings.
See "The Menu System Map" on page 7-12
LANGUAGE
DEFAULTS LOADED
Config mode is de-selected -
LEDs cease flashing
The power data is stored
The Keypad
890SD (Standalone) Drive: Frame G, H & J