Keypad Menus
890CD Common Bus Drive & 890SD Standalone Drive
PREF
6901 Display
136.02
CONTROL MODE
101.08
* MAX SPEED
100.02
RAMP ACCEL TIME The time taken for the 890 output frequency to
100.03
RAMP DECEL TIME The time taken for the 890 output frequency to
8-19
Page
QUICK SETUP MENU
Description
This parameter contains the main method of
motor control used by the drive
The speed at which the 890 will run when
maximum setpoint is applied. The default is
Product Code dependent
ramp up from zero to MAX SPEED
ramp down from MAX SPEED to zero
Range
0 : VOLTS / Hz
1 : SENSORLESS VEC
2 : CLOSED-LOOP VEC
3 : 4-Q REGEN
4 : PMAC
0 to 32000 RPM
0.0 to 3000.0s
0.0 to 3000.0s
890SD Standalone Drive - Frames G, H & J
Default
0
1500 RPM
10.0s
10.0s