Parameter Descriptions
POSITION OUTPUT
This diagnostic shows the position demand in load mechanical degrees.
SPEED OUTPUT
This diagnostic shows the speed demand in load mechanical Hz (rev/s).
ACCEL OUTPUT
This diagnostic shows the acceleration demand in load mechanical Hz/s (rev/s
MASTER POSITION
This diagnostic shows the master aster position demand in mechanical degrees.
MASTER SPEED
This diagnostic shows the master speed demand in mechanical Hz (rev/s).
MASTER ACCEL
This diagnostic shows the master acceleration demand in mechanical Hz/s (rev/s
READY
This diagnostic is TRUE when local drive is properly synchronised with the master, i.e. Status = READY.
890SD Standalone Drive - Frames G, H & J
PREF: 119.06
PREF: 119.07
PREF: 119.08
PREF: 119.09
PREF: 119.10
PREF: 119.11
PREF: 119.14
Default: —.xxxx deg
Default: —.xx Hz
Default: —.xx
2
).
Default: —.xxxx deg
Default: —.xxxx Hz
Default: —.xxxx
2
).
Default: FALSE
Range: —.xxxx deg
Range: —.xx Hz
Range: —.xx
Range: —.xxxx deg
Range: —.xxxx Hz
Range: —.xxxx
Range: FALSE / TRUE
Page
D-51