Parker AC890 Product Manual page 39

890SD Standalone Drive
Main Cooling Fan and Supply Requirements
The Frame G and H drives have an integral main cooling fan. However, the Frame J drive has a separate
main cooling fan which must be fitted to the bottom panel of the enclosure as shown in drawing
HG465731U001 at the end of this chapter, with the 4 off M6 nuts provided. Refer to drawing
HG463151D002 for fan wiring details (Frame J only) in Chapter 10: "Routine Maintenance and Repair" –
Fan Replacement.
The drives require an external single phase supply and fuse protection (motor start type) for the main
cooling fan.
Drive
Frame G
<=132kW / 200HP
Frame G
>132kW / 200HP
Frame G
>132kW / 200HP
Frame H
Frame J
4-20
Page
Airflow
Part Number
(cfm / m
DL389775 350/595
DL464085 350/595
DL465651U115 475/807
DL465651U230 475/807
DL471062U115 475/807
DL471062U1230 475/807
DL389776U001 883/1500
DL464086U001 883/1500
DL389776U001 1032/1753
DL464086U001 1032/1753
Supply Volts Watts
3 /hr)
115 205
230 195
115 315
230 330
115 405
230 355
115 560
230 520
115 600
230 560
890SD (Standalone) Drive: Frame G, H & J
Fuse
3A
2A
4A
2A
5A
3A
8A
4A
10A
5A