DB unit IGBT fault alarm
M1 phase IGBT over-temperature
M2 phase IGBT over-temperature
M3 phase IGBT over-temperature
DB unit IGBT over-temperature
Output current imbalance
CAL board not fitted
Internal supply fail
FPGA not programmed
890SD Standalone Drive - Frames G, H & J
Fault
Illuminated LEDs
Internal fault - consult supplier
Check wiring and verify value of brake
resistor
Maximum IGBT junction temperature
exceeded
Check operation of main cooling fan
and supply
Check that cooling path is free from
obstruction
Clean or replace cubicle inlet air filters
Check wiring to motor and motor itself
for earth faults
Internal fault - consult supplier
Internal fault - consult supplier
Action
9-27
Page