Trips and Fault Finding
Trips Table
The following trips may occur to protect the drive.
6511
6901
Keypad
Keypad
Display
Display
DCHI
OVERVOLTAGE
DCLO
UNDERVOLTAGE
9-4
Page
Description
The drive internal dc link
voltage is too high
The drive internal dc link
voltage is too low
Possible Reason for Trip
The supply voltage is too high
Trying to decelerate a large inertia load too quickly
The brake resistor is open circuit
The supply voltage is too low
The supply has been lost
A supply phase is missing
890SD Standalone Drive - Frames G, H & J