The Keypad
Keys for Operating the Drive Locally
FORWARD/
Control - Changes the direction of motor rotation. Only operates when the
REVERSE
drive is in Local Speed Control mode.
JOG
Control - Runs the motor at a speed determined by the JOG SETPOINT
parameter. When the key is released, the drive returns to "stopped". Only
JOG
operates when the drive is "stopped" and in Local Start/Stop mode.
RUN
Control - Runs the motor at a speed determined by the LOCAL SETPOINT or
REMOTE SETPOINT parameter.
Trip Reset - Resets any trips and then runs the motor as above. Only operates
when the drive is in Local Start/Stop (Seq) mode.
STOP/RESET
Control - Stops the motor. Only operates when the drive is in Local Sequence
mode.
Trip Reset - Resets any trips and clears displayed message if trip is no longer
active.
7-5
Page
890SD (Standalone) Drive: Frame G, H & J