Phase Offset - Parker AC890 Product Manual

PHASE OFFSET

SETUP::PHASE CONTROL::PHASE OFFSET
CLOSED-LOOP VEC Motor Control Mode only.
Provides an unramped position Offset of the Master reference position with respect to the Load position, or an unramped speed
Offset to the Master reference speed.
Phase Output = Error + Offset + Offset Fine
Parameter Descriptions
OFFSET
A course offset added to the phase error allowing an absolute phase correction to be applied. The Offset is added to the phase at
a maximum rate of 32768 counts.
OFFSET FINE
Additional correction added to OFFSET to allow fine control of position.
SPEED OFFSET
A speed offset added to the speed demand.
ACTIVE
True while the offset count is being added.
890SD Standalone Drive - Frames G, H & J
PREF: 110.01
PREF: 110.02
PREF: 110.04
PREF: 110.03
Default: 0.0
Default: 0.0000
Default: 0.00 %
Default: FALSE
Range: -3000.0 to 3000.0
Range: -1.0000 to 1.0000
Range: -300.00 to 300.00 %
Range: FALSE / TRUE
D-107
Page