P Series Products Overview; P Series Features; Pd Drive Names; Input Power - Parker P Series User Manual

1.1 P Series Products Overview

The PD drives are a family of super compact, super economic digital servo drives. Their
maximum continuous shaft power ranges from 100 Watts to 3500 Watts (3.5kW). Ready
for direct panel mounting, you can select the precise power level needed for your
application.

1.1.1 P series Features

PD drives support auto-configuration through BiSS-C protocol when using PM series servo
motors. Also, drives have multiple feedback interfaces like EnDAT2.2, Quadrature, Sin/Cos
and Tamagawa serial encoder.
PM motors are economic, flexible and reliable rotary servo motor. Those are available in
40, 62, 80, 130 and 180 frame size. Rated output power has various range from 50W to
3500W. And 0.16Nm to 16.7Nm rated torque within 3000rpm rated speed can be available.
Drive support tool software to setup the servo motor has user-friendly and easy features. It
also has many features like support step by step configuration, pre-defined profile function,
auto tuning(real-time), various homing mode, jog motion, point to point movement, 4
channel oscilloscope and easy firmware update with PD drives.

1.1.2 PD Drive Names

The following diagram explains the PD drive part numbers :

Figure 1. PD Drive Names

1.1.3 Input Power

Motor Power
PD - 04xx, PD - 10xx
PD - 35xx.............................................230 VAC, 3-phase, 50/60Hz
Control Power
PD - 04xx, PD - 10xx
PD - 35xx.............................................230 VAC, Single-phase, 50/60Hz
Parker Hannifin
P series User Guide 16