The Operator Menu - Parker AC890 Product Manual

Keypad Menus

The OPERATOR Menu

890CD Common Bus Drive & 890SD Standalone Drive
(Fixed as PREF 101.10) Indicates target speed. This will be equal to either:
LOCAL SETPOINT, REMOTE SETPOINT, JOG SETPOINT,
COMMS SETPOINT or FIREWIRE SETPOINT.
(Default: PREF 101.16) Indicates actual speed demand. This is the input to the Drive.
(Default: PREF 73.04) The Drive output frequency.
(Default: PREF 70.13) This diagnostic contains the level of rms line current being drawn from the Drive.
(Default: PREF 70.10) Shows the estimated motor torque, as a percentage of rated motor torque.
(Default: PREF 70.02) This shows the voltage on the dc link capacitors.
8-7
Page
OPERATOR MENU
6901 Display
SETPOINT (xxxxxx)
(Refer to the REFERENCE or REFERENCE JOG
function blocks)
SPEED DEMAND
(Refer to the REFERENCE function block)
DRIVE FREQUENCY
(Refer to the REFERENCE function block)
MOTOR CURRENT A
(Refer to the REFERENCE function block)
TORQUE FEEDBACK
(Refer to the REFERENCE function block)
DC LINK VOLTS
(Refer to the REFERENCE function block)
Range: —.xx %
Range: —.xx %
Range: —.xx Hz
Range: —.xx A
Range: —.xx %
Range: —. V
890SD Standalone Drive - Frames G, H & J