Parameter Descriptions
SPEED FBK RPM
This parameter changes according to the CONTROL MODE (DRIVE CONFIG function block):
In CLOSED-LOOP VEC mode the parameter shows the mechanical speed of the motor shaft in revolutions per minute as
calculated from the speed feedback device.
In SENSORLESS VEC mode the parameter shows the calculated mechanical speed of the motor shaft in revolutions per
minute.
In VOLTS/Hz mode the parameter shows motor synchronous speed in rpm.
In PMAC control mode, the parameter shows the mechanical speed of the motor shaft.
SPEED FBK REV/S
This parameter changes according to the CONTROL MODE (DRIVE CONFIG function block):
In CLOSED-LOOP VEC mode the parameter shows the mechanical speed of the motor shaft in revolutions per second as
calculated from the motor speed feedback.
In SENSORLESS VEC mode the parameter shows the calculated mechanical speed of the motor shaft in revolutions per
second.
In VOLTS / Hz mode, the parameter shows the motor synchronous speed in revolutions per second.
In PMAC control mode, the parameter shows the mechanical speed of the motor shaft.
890SD Standalone Drive - Frames G, H & J
PREF: 70.04
PREF: 70.05
Default: —.xx rpm
Default: —.xx rev/s
Range: —.xx rpm
Range: —.xx rev/s
D-45
Page