The Menu System - Parker AC890 Product Manual

The Keypad
1

The Menu System

The unit will initialise in Remote Mode from factory conditions. The Keypad will display the Operator
Menu. Each menu contains parameters.
890SD (Standalone) Drive: Frame G, H & J
y
WELCOME SCREEN
M
OPERATOR
menu at level 1
DIAGNOSTICS
menu at level 1
SETUP
QUICK SETUP
menu at level 1
SETUP
menu at level 1
SYSTEM
menu at level 1
Welcome Screen Displays the software version of the unit
From the Welcome Screen, the display times-out (alternatively
you can press the key) to show the first of 4 menus:
A customised view of selected parameters
Operator contained in the SETUP menu. Refer to
Chapter 8.
A view of important diagnostic parameters
Diagnostics contained in the SETUP menu. Refer to
Chapter 8.
A quick-setup list of the most commonly
Quick Setup used configuration parameters. Refer to
Chapter 8.
Contains all the function blocks parameters
Setup for programming your application. Refer to
Appendix D.
System Application "save" and macro selection.
7-10
Page