Power-Up Key Combinations; Resetting To Factory Defaults (2-Button Reset) - Parker AC890 Product Manual

Power-up Key Combinations

Resetting to Factory Defaults (2-button reset)

A special key combination restores to the drive the current product code default parameter values. This
feature is only available at power-up as a security measure.
6901 Keypad Combination
On pressing "UP", the factory defaults will be restored. The keypad will display the RESTORE
DEFAULTS menu. Press "E" to exit this menu.
If you decide not to update to factory defaults, press the "E" key twice to return to the menus at level 1.
7-23
Page
Hold down the keys opposite:
Power-up the drive, continue
to hold for at least 2 seconds
RESTORE DEFAULTS
"UP" TO CONFIRM
The Keypad
HOLD
E
E
890SD (Standalone) Drive: Frame G, H & J