Energy Meter - Parker AC890 Product Manual

ENERGY METER

SETUP::MOTOR CONTROL::ENERGY METER
Designed for all Motor Control Modes.
This block measures the electrical energy used by the motor.
Parameter Descriptions
RESET
When RESET is set to TRUE, the ENERGY USED parameter is reset to zero automatically when the maximum value is reached.
When RESET is set to FALSE, the ENERGY USED parameter is held at the maximum value when the maximum value has been
reached
Changing this from FALSE to TRUE at anytime will cause the ENERGY USED parameter to be reset to zero.
POWER
This diagnostic shows the power being delivered to the load in kilowatts.
POWER
This diagnostic shows the power being delivered to the load in horsepower.
REACTIVE POWER
This diagnostic shows the reactive power being delivered to the load in kilo volt-amperes reactive.
ENERGY USED
This diagnostic shows the total energy consumed by the load in kilowatt hours.
POWER FACTOR
This diagnostic shows the power factor estimate (between 0 and 1).
PF ANGLE
This diagnostic shows the power factor angle estimate.
D-42
Page
PREF: 113.01
PREF: 113.02
PREF: 113.03
PREF: 113.04
PREF: 113.05
PREF: 113.07
PREF: 113.08
Default: FALSE
Default: 0.00 kW
Default: 0.00 hp
Default: 0.00 kVAR
Default: 0.00 kW hr
Default: 0.0
Default: 0.00 deg
Range: FALSE / TRUE
Range: —.xx kW
Range: —.xx hp
Range: —.xx kVAR
Range: —.x kW hr
Range: —.x
Range: —.xx deg
890SD Standalone Drive - Frames G, H & J