Setpoint Display - Parker AC890 Product Manual

SETPOINT DISPLAY

SETUP::MENUS::SETPOINT DISPLAY
This function block allows you to customise the setpoint name and setpoint parameter value.
Parameter Descriptions
NAME
Enter your customised text for the setpoint name. If this name is left blank, then the default setpoint name will be used, for
example: SETPOINT (LOCAL), SETPOINT (JOG) etc.
SCALING
A scaling factor applied to the speed setpoint and feedback displays. Selects a DISPLAY SCALE function block to be applied.
Enumerated Value : State
IGNORE PASSWORD
When TRUE the setpoint may be modified even when a password is used to make all other parameter read-only.
890SD Standalone Drive - Frames G, H & J
PREF: 32.02
PREF: 32.03
0 : NONE
1 : DISPLAY SCALE 1
2 : DISPLAY SCALE 2
3 : DISPLAY SCALE 3
4 : DISPLAY SCALE 4
PREF: 32.05
Default:
Default: 0
Default: TRUE
Range: max length 16 chars
Range: 0 to 4
Range: FALSE / TRUE
D-143
Page