Parker AC890 Product Manual page 419

Parameter Descriptions
SRAMP ACCEL
Sets the acceleration rate in units of percent per second², i.e. if the full speed of the machine is 1.25m/s then the acceleration
will be:
1.25 x 75.00% = 0.9375m/s²
SRAMP DECEL
This functions in the same way as SRAMP ACCEL above.
SRAMP JERK 1
Rate of change of acceleration for the first segment of the curve in units of percent per second³, i.e. if the full speed of the
machine is 1.25m/s then the jerk will be:
1.25 x 50.00% = 0.625m/s³
SRAMP JERK 2
Rate of change of acceleration in units of percent per second³ for segment 2.
SRAMP JERK 3
Rate of change of acceleration in units of percent per second³ for segment 3.
SRAMP JERK 4
Rate of change of acceleration in units of percent per second³ for segment 4.
HOLD
When TRUE the output of the ramp is held at its last value.
RAMPING
Set TRUE when ramping.
D-128
Page
PREF: 100.07
PREF: 100.08
PREF: 100.09
PREF: 100.10
PREF: 100.11
PREF: 100.12
PREF: 100.13
PREF: 100.14
Default: 10.0
Default: 10.0
Default: 10.0
Default: 10.0
Default: 10.0
Default: 10.0
Default: FALSE
Default: FALSE
Range: 0.00 to 100.00 /s²
Range: 0.00 to 100.00 /s²
Range: 0.00 to 100.00 /s
Range: 0.00 to 100.00 /s
Range: 0.00 to 100.00 /s
Range: 0.00 to 100.00 /s
Range: FALSE / TRUE
Range: FALSE / TRUE
890SD Standalone Drive - Frames G, H & J
3
3
3
3