Product Related Default Values - Parker AC890 Product Manual

Product Related Default Values

The Default values in the tables below are correct for when a 2.2kW Frame B power board is fitted.
* Frequency Dependent Defaults
These parameter values (marked with "*" in function block descriptions) are dependent upon the drive's
default motor BASE FREQUENCY.
Parameter
BASE FREQUENCY
MOTOR CONNECTION
MOTOR VOLTAGE
NAMEPLATE RPM
MAX SPEED
230V, 400V or 500V depending upon the power build of the unit - refer to the Model Number on
the Product Label.
Note Refer to Chapter 9: "The Keypad" - Changing the Product Code (3-button reset).
D-260
Page
Function Block
MOTOR INDUCTION
MOTOR INDUCTION
MOTOR INDUCTION
MOTOR INDUCTION
REFERENCE
PREF
50Hz Operation 60Hz Operation
27.03 50.0Hz
27.08 STAR
27.04 *
27.07 1420 RPM
101.08 1500 RPM
890SD Standalone Drive - Frames G, H & J
Default
60.0Hz
STAR
*
1750 RPM
1800 RPM