Parker AC890 Product Manual page 16

DBR Brake Resistor
Connection
Positive (+) DC
Buss Connection
PE/Ground Connection
Lifting eyes (*See Note 1)
Must be left turned in this direction
Power Input
Connection (L3)
MMI & Local/Remote
Keypad
Power Input
Connection (L2)
Power Input
Connection (L1)
PE/Ground Connection
Lifting eyes (*See Note 1)
Must be left turned in this direction
115V AC / 230V AC
Fan Supply
890SD (Standalone) Drive: Frame G, H & J
Brake Resistor
Connections
Power Board
Diagnostic LEDS
BOTTOM WITH COVER REMOVED
Figure 3.1 Component Identification
Brake Unit
Negative (-) DC
Buss Connection
PE/Ground
Connection
A C 8 9 0
Lifting eyes (*See Note 1)
WARNING
Must be left turned in this direction
Warning Label
Power Output
Connection (M3/U)
Power Output
Connection (M2/V)
PE/Ground
Connection
Lifting eyes (*See Note 1)
Must be left turned in this direction
Power Output
Connection (M1/W)
Main Fan Housing
Option Cards
Operator Station Connector (P3)
Motor Thermistor
Control Terminals
Product Overview
* Note 1:
PE / Grounding Connections
Lifting eyes must be replaced with supply and motor earth
(ground) connections using M10 bolts and washers supplied.
Under no circumstances should lifting eyes be used to make
the PE / grounding connection.
Plan view
REPLACE WITH
Page
3-4